Corfu
We provide footage and full rolls (minimum 1 linear meter).
CORFU
ROLL. 80 linear meters +/-
WIDTH. 1.60 meters +/-
WEIGHT. 200 g/m2 +/-
COMPOSITION. Surface: Polyolefin (UV resistant). Support: Polypropylene (DOES NOT ALLOW CONDENSATION)
MAXIMUM TENSILE STRENGTH (LONGITUDINAL). >150 N/5 cm
MAXIMUM TENSILE STRENGTH (TRANSVERSE). >150 N/5 cm
MAXIMUM ELONGATION (LONGITUDINAL). >50%
MAXIMUM ELONGATION (TRANSVERSE). >90%
TEAR STRENGTH (LONGITUDINAL). >15N
TEAR STRENGTH (TRANSVERSE). >20N
LIGHT RESISTANCE. >7
STABILITY AGAINST UV RAYS AFTER 2000 HOURS. >3-4 (GM)
PERMEABILITY TO WATER VAPOR (24 HOURS). 25 g/m2 / 10 g/m2 x d
WATERPROOFNESS. 9000 mm
APPLICATIONS. BOAT COVERS, CAR COVERS, ETC. (OUTDOOR / INDOOR)
The CORFU material is recommended for use in boat covers. It can be used to cover delicate outdoor objects. CORFU is based on a wool substrate material and is therefore suitable for use on delicate surfaces such as varnished wood, delicate paints, stainless steel, etc.
It is resistant to saltwater and bird droppings, waterproof from top to bottom and bottom to top, and absorbs moisture and condensation.
Mechanically stable in the temperature range of 40ºF-176F. Soft and elastic at low temperatures.
It is recommended to clean the material regularly. Mild detergents can be used for this purpose. Do not use solvents or abrasive products, etc. We also recommend using pressure products after cleaning and allowing them to air dry. Never store wet or damp.
The CORFU material can be sewn or welded using ultrasonic welding machines (high-frequency welding is not possible).
Occasionally, mold may appear despite complying with cleaning procedures. This is caused by improper use. Therefore, ensure proper ventilation of the cover (air intakes, fabric meshes, etc.)
The CORFU material can be placed directly on the object to be covered as it has a fleece finish on the lining.
Storage is important as it prolongs the life of the cover. Store in dry and ventilated places. Never store wet covers. Avoid covering wet or damp objects.
CORFU
ROLL. 80 linear meters +/-
WIDTH. 1.60 meters +/-
WEIGHT. 200 g/m2 +/-
COMPOSITION. Surface: Polyolefin (UV resistant). Support: Polypropylene (DOES NOT ALLOW CONDENSATION)
MAXIMUM TENSILE STRENGTH (LONGITUDINAL). >150 N/5 cm
MAXIMUM TENSILE STRENGTH (TRANSVERSE). >150 N/5 cm
MAXIMUM ELONGATION (LONGITUDINAL). >50%
MAXIMUM ELONGATION (TRANSVERSE). >90%
TEAR STRENGTH (LONGITUDINAL). >15N
TEAR STRENGTH (TRANSVERSE). >20N
LIGHT RESISTANCE. >7
STABILITY AGAINST UV RAYS AFTER 2000 HOURS. >3-4 (GM)
PERMEABILITY TO WATER VAPOR (24 HOURS). 25 g/m2 / 10 g/m2 x d
WATERPROOFNESS. 9000 mm
APPLICATIONS. BOAT COVERS, CAR COVERS, ETC. (OUTDOOR / INDOOR)
The CORFU material is recommended for use in boat covers. It can be used to cover delicate outdoor objects. CORFU is based on a wool substrate material and is therefore suitable for use on delicate surfaces such as varnished wood, delicate paints, stainless steel, etc.
It is resistant to saltwater and bird droppings, waterproof from top to bottom and bottom to top, and absorbs moisture and condensation.
Mechanically stable in the temperature range of 40ºF-176F. Soft and elastic at low temperatures.
It is recommended to clean the material regularly. Mild detergents can be used for this purpose. Do not use solvents or abrasive products, etc. We also recommend using pressure products after cleaning and allowing them to air dry. Never store wet or damp.
The CORFU material can be sewn or welded using ultrasonic welding machines (high-frequency welding is not possible).
Occasionally, mold may appear despite complying with cleaning procedures. This is caused by improper use. Therefore, ensure proper ventilation of the cover (air intakes, fabric meshes, etc.)
The CORFU material can be placed directly on the object to be covered as it has a fleece finish on the lining.
Storage is important as it prolongs the life of the cover. Store in dry and ventilated places. Never store wet covers. Avoid covering wet or damp objects.